Easy mode

Now Anyone can Perform High-Quality Measurements

Developed with years
of experience and
technical knowledge.
Easy Mode and AI-
Scan allow anyone
to perform expert
measurements.

World’s FirstThe 3 functions of AI-Scan Start measurement with a single click

1. AAG function * AAG=Advanced Auto Gain

Automatically selects the two best settings for the laser light-receiving element to allow for accurate measurements to be made on angled surfaces and targets with varying levels of contrast.

1-1. Automatic adjustment of the laser sensitivity			1-2. Optimal adjustment at each height
Glare	(1) Sensitivity adjustment		CONVENTIONAL ALGORITHM	AAG FUNCTION
	Changes the sensitivity of the light- receiving element to prevent saturation when scanning a sample.		Field of View	Field of View
	AAG ORIGINAL
	(2) Sensitivity readjustment*		Conventional systems only adjust the laser sensitivity at a certain height, making it impossible to account for changes in the surface of the target throughout the entire measurement range.
	Automatically adjusts to raise the sensitivity to a level just below the level that will produce saturation.
* If settings are performed without this adjustment, reflections on angled surfaces and dark surfaces will be weaker and cause errors.

2. Auto setting of the upper and lower limits

Automatically recognizes and sets the upper and lower limits of the measurement range, and then collects measurement data by scanning the target throughout that range.

The lens scans automatically		The upper and lower limits on the screen are recognized and automatically set as the measurement range
			Upper limit
			Lower limit

3. Double scan function

Adjusts the measurement and capture settings and automatically re-scans the target to obtain information that wasn’t detected during the first scan.